Photopolymerization of hyperbranched aliphatic acrylated poly(amide ester). I. Synthesis and properties

The hyperbranched aliphatic poly(amide ester) (HAPAE) was synthesized based on 4‐N,N‐di(2‐hydroxy ethyl)‐4‐ketobutyric acid prepared by the reaction of succinic anhydride with diethanol amine, as an AB₂ monomer (repeating unit), and with 2‐ethyl‐2‐(hydroxymethyl)‐1,3‐propanediol, as a core molecule, using acid catalysis. The second generation of the product was characterized by measuring dynamic viscosity, which decreased sharply with the increase in frequency. The product exhibits relative thermal stability as analyzed by thermogravimetry in a nitrogen atmosphere. The glass transition temperature, determined by differential scanning calorimetry, is ?27 °C. The molar mass was measured by vapor pressure osmometry. The polydispersity, measured by size exclusion chromatography, is 2.16. Dynamic mechanical thermal analyses were performed to characterize the thermal properties of the ultraviolet‐cured films of the acrylate‐modified HAPAE. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1630–1636, 2001     

Redox processes in pressurised smoked salmon studied by resonance Raman spectroscopy

Non-thermal food preservation technology is based on the application of high pressures up to 600 MPa. Here we report a resonance Raman (RR) spectroscopic analysis of smoked salmon meat after high pressure processing. High quality spectra, which can be obtained even from packed salmon without spectral interference of the packing foil, allow determining pressure-dependent irreversible changes of the main RR-active components of salmon meat, astaxanthin and myoglobin/haemoglobin. High pressure-treatment causes a decrease of the relative RR intensities of astaxanthin as probed with 514 nm excitation which is in line with a slight attenuation of the originally intense red colour of the salmon meat. 413-nm excited RR spectra indicate a heterogeneous broadening of astaxanthin bands accompanied by the formation of deoxy-myoglobin or deoxy-haemoglobin. The results suggest that pressure-treatment facilitates the oxidative degradation of astaxanthin coupled to the reduction of metmyoglobin (methaemoglobin).     

MINIATURE PULSE TUBE FOR THE COOLING OF ELECTRONIC DEVICES: FUNCTIONING PRINCIPLES AND PRACTICAL MODELING

The miniaturization of refrigerating systems represents a very current scientific and technical challenge to improve the performances of numerous electronic components. This work presents a global approach to the problem and suggests studying the cooling by means of small channels filled with an oscillating gas: the double inlet pulse tube refrigerator (DIPTR). A great level of miniaturization based on the technology of carving silicon is exposed. This study proposes to apply an electric analogy for modeling both hydrodynamic and thermal phenomena. Considering the complexity of the theoretical problem including mechanical, thermal, thermodynamical, and acoustic considerations, the authors take care to summarize the main governing equations in a particular form so any scientific engineer could understand the DIPTR principle.     

Chloride binding isotherm from migration and diffusion tests

Chloride binding is often described by chloride binding isotherm, which is closely related to the service life of concrete structures in chloride environments. Many methods have been proposed to determine chloride binding isotherm. Compared to other methods, chloride binding isotherms obtained directly from nonsteady-state diffusion tests seem closer to the reality. We studied the chloride binding isotherm from both nonsteady-state electrical-accelerated migration and diffusion tests at different temperatures. Twelve concrete mixes with different supplementary cementing materials and water-to-binder ratios of 0.35, 0.48 and 0.6 were cast for study. The specimens after diffusion (or migration) tests were sliced layer by layer, and acid-soluble and free chloride contents of each layer were measured. A chloride binding isotherm was obtained from one specimen. Experimental results indicated that electrical voltage had a slight effect on the chloride binding isotherm of concrete. Temperature had a positive effect on chloride binding. The higher the water-to-binder ratio was, the higher the chloride binding was.     

Full Film, Boundary Lubrication and Tribochemistry in Steel Circular Contacts Lubricated with Glycerol

In this article, the lubricating properties of pure glycerol are investigated under both mild and severe EHL regimes. Amazingly low friction coefficients (about 0.01) are reported by experiments in thick film regimes compared to traditional base oils. EHL calculations of film thickness and friction (including thermal effects) predict friction coefficients that are twice those actually found for glycerol. Chemical analysis of glycerol before and after the friction tests were performed by NMR and Karl Fischer methods, and they reveal that water is produced by tribochemical reaction as well as other species like aldehydes. This finding is in agreement with a corrosion pattern observed inside the wear scars of the steel samples. This study provides an explanation to the anomalously low friction observed in the thick film regime. In fact, water produced in the lubricant decreases traction forces due to the drastic decrease of the viscosity of glycerol with water addition.     

Passive protections against breakdowns between accelerating grids in SPIDER experiment

In the SPIDER experiment a ITER-like full size plasma source will be realized with the target to extract a Dˉ beam of 70 A and then to accelerate it to 100 keV energy. The reduction of the effects due to the frequent breakdowns between the accelerating grids is needed, because of grids damage due to energy deposition by arcing and strong electromagnetic noise (EMI) emission. The solution proposed is a comprehensive design of the circuit. Two passive components are installed: a Damping Resistor and an Output Filter in series to the Power Supplies. Then a doubled screened structure will be adopted for the 30 m long – 100 kV Transmission Line TL, which connects the Ion Source and Acceleration Power Supplies to their loads: the Inner Screen will be connected to the reference ground (the vessel) by a resistive link, the Outer Screen acting as a low-impedance ground. Finally, a Distributed Core Snubber DCS (magnetic snubber) will be installed onto the TL, aimed to increase the damping of the oscillations due to the stray inductances and capacitances. The DCS is composed of 10 magnetic alloy cores and is equipped by a biasing circuit to enhance the flux swing in unsaturated condition during the breakdown. A detailed model of the circuit is developed to evaluate the passive components parameters for protection against breakdown, in which all the magnetic and capacitive couplings between components are modeled as well as the magnetic core snubber saturation.     

Silver (Ag) as anode and cathode current collectors in high temperature planar solid oxide fuel cells

Planar electrolyte supported solid oxide fuel cells were operated at 900 °C with humidified H₂ for 200 h using silver mesh and paste for cathode current collection. Continuous potentiostatic tests at 0.7 V appeared to induce migration of Ag towards electrode-electrolyte interphase, while continuous OCV tests caused no mass transport. Similar SOFCs fueled by coal syngas at 850 °C using Ag for both anode and cathode current collection indicated little, if any, Ag migration; providing the possibility of employing Ag for 100 h laboratory scale tests using coal-derived syngas. Use of high temperature steam, carbon dioxide and carbon monoxide did not result in the formation of silver carbonates.     

A novel magneto‐impedance sensor model based on the zeros of Bessel functions

Nowadays, the design of magneto‐impedance (MI) sensors requires the development of lumped circuit models that can be simulated through equivalent impedance circuits relied on Bessel functions. A new impedance model based on Senani's equivalent using the zeros of Bessel functions is developed in this paper. The model allows to describe the impedance as a transfer function that can be easily synthesized by means of current conveyor circuits and passive elements. The mathematical representation was verified under simulation of transfer functions involving different number of poles and zeros. Moreover, the model has been verified using SPICE simulations and measurement results from a fabricated prototype demonstrating its scope and validity. Finally, a study of finite tracking errors of CCIIs used in the implementation of magneto‐impedance sensor has been realized. Copyright © 2014 John Wiley & Sons, Ltd.     

Microkinetic model for the pyrolysis of methyl esters: From model compound to industrial biodiesel

A tool for the generation of decomposition schemes of large molecules has been developed. These decomposition schemes contain radicals which can be eliminated from the model equations if both the μ‐hypothesis and the pseudosteady‐state approximation are valid. The reaction rate coefficients and thermodynamic parameters have been calculated by incorporating a comprehensive group additive framework. A microkinetic model for the pyrolysis of methyl esters with a carbon number of up to 19 has been generated using this tool. It is validated by comparing calculated and experimental yields of the pyrolysis of methyl decanoate and novel rapeseed methyl ester pyrolysis data in the temperature range from 800 to 1100 K and methyl ester partial pressure range from 1 × 10^?3 to 1 × 10^?2 MPa. This modeling frame work allows to not only assess the use of methyl ester mixtures as potential feedstock for olefin production but also their effect as blend‐in or trace impurity. © 2015 American Institute of Chemical Engineers AIChE J, 61: 4309–4322, 2015